This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
You do not have permission to view link please Log in or Register
Here is a simple circuit to charge 6V, 4.5Ah rechargeable Lead-acid battery from the solar panel. This solar charger has current and voltage regulation and also has over voltage cut off facilities. This circuit may also be used to charge any battery at constant voltage because output voltage is adjustable.
You do not have permission to view link please Log in or Register
This article aims to describe the principle of operation, design, and working of a simple car battery charger from the AC mains supply and a feedback control section to control the battery charging.
You do not have permission to view link please Log in or Register
In this project, we are designing the circuit which is used to detect and control the water level automatically in an overhead tank using 8051 microcontrollers. It is used in industries to control the liquid level automatically.
You do not have permission to view link please Log in or Register
This is the simple and cost-effective automatic emergency light circuit with light sensing. This system charges from the main supply and gets activated when the main supply is turned OFF. This emergency lamp will work for more than 8 hours.
You do not have permission to view link please Log in or Register
The main principle of this circuit is that the door lock opens only when the buttons are pressed in an order. The transistor and diode play a main role in the circuit.
You do not have permission to view link please Log in or Register
This charger automatically shuts off the charging process when the battery attains full charge. This prevents the deep charge of the battery. If the battery voltage is below the 12V, then the circuit automatically charges the battery.
You do not have permission to view link please Log in or Register
The main principle of this circuit is to switch ON the light when the LDR is illuminated. This circuit can be used in security applications like when there is darkness on the LDR, it stops lighting.
You do not have permission to view link please Log in or Register
This is a simple spy robot circuit that can be controlled by the remote. The maximum controllable range is 125 meters. It is used to observe the behavior of wild animals where human beings cannot reach